IDTech Augusta - "Unable to Read Track Data"

 

Depending on your system specifications it may be necessary to slow down the track read speed of the Augusta readers. A card read will display "Unable to read track data" indicating that slowing down the read speed may be needed.

Step 1: Please click on the link below to install the SDK Demo Tool. IdTech will list this tool as "dot NET SDK Demo.zip for Windows".
Dot Net SDK Demo Application

Step 2: Once you've downloaded and installed the SDK Demo Tool please continue with the below steps:

1. Ensure the device is connected
2. Select “Send Data Command” under “Device”
3. Select the radio button “Wrap ITP” on the right
4. Insert “53 12 01 32” into the text box ( **NOTE** If the merchant continues to experience the error, you can even slow the track data down further by changing the last number of the command string from 32, to 31 or 30 )
5. Select “Execute Command”
6. Ensure the response is “06” this means the command sent to the device was successful

Step 4: After following the above steps, you are able to test on the site to see if track data is populating correctly https://fts.cardconnect.com/itoke/ajax-tokenizer.html

Step 5: You can test a card read within Club Caddie

• Related Articles

• IDTech Augusta - Slowing Down Track Speed

  Depending on your system specifications it may be necessary to slow down the track read speed of the Augusta readers. A card read will display "Unable to read track data" indicating that slowing down the read speed may be needed. Step 1: Please click ...

• Common Credit Card Decline Codes

  Article Contents: This article provides a list of common credit card decline codes and their definitions, along with practical explanations and recommended actions for each code. The decline codes are categorized into various types, such as: 1. ...

• Ingenico IPP-320 - Blank Message or Not Connected

  Article Contents:- This article summarizes resolution steps to address a disconnected Ingenico IPP320 card reader. Note:- Follow these step after the Ingenico credit card reader is plugged into the system and after all drivers and mSDK services have ...

• How to change the IP settings on a PAX S300 card reader.

  Article Contents This article shows how to change the IP settings on a PAX S300 card reader. Step-by-Step: Step 1: First press the 1 and the F buttons simultaneously on the credit card machine. This will then display a password prompt screen. The ...

• Clover Flex Activation Experience

  Article Contents: How to activate Clover Flex