Ingenico Lane/3000 - Device Restarting Unexpectedly

Ingenico Lane/3000 - Device Restarting Unexpectedly

Article Contents: This article explains how to correct the issue of a device unexpectedly restarting during the day, which is commonly caused by inaccurate time settings. It provides a step-by-step guide to updating your time settings on the CardPointe Integrated Terminal.


Step By Step:

Step 1: Access the CardPointe Integrated Terminal menu.

Stop 2: Scroll down to Date and Time.

Stop 3: Press O (green button) to access Date and Time settings.

Step 4: Enter the current date using the device number pad.

Step 5: Scroll down to the time.

Step 6: Enter the current time in 24-hour format, using the device number pad.

Step 7: Press O (green button) to save your settings.


    • Related Articles

    • Ingenico Lane/3000 User Guide

      Article Contents: This Ingenico Lane/3000 User Guide covers the device's features, setup process, and troubleshooting. It explains how to connect the device, enter text using the multi-tap method, and access the Admin Menu for advanced configuration. ...

    • Ingenico Lane/3000 Time Setting

      Article Contents: To adjust the date and time in the Lane/3000 settings you will need to navigate the admin menu for the device by following the below instructions. Step By Step Guide: Step 1: Accessing and Navigating the Admin Menu. - The Admin Menu ...

    • Ingenico Lane/3000 - Configuring the Device Beep Settings

      Article Contents: Introduction to Beep Settings Adjustment, Accessing the Beep Menu for Temporary Changes, Adjusting Beep Settings: Steps and Parameters, Permanent Changes to Beep Settings, Contacting Support for Permanent Adjustments. Step By Step: ...

    • Ingenico Lane/3000 - Device Disconnected

      Step By Step: Step 1: Verify that you are using the provided multi-point mono connector (Ethernet) cable and power supply. The power supply plugs into the splitter on the Ingenico multi-point mono connector cable. Step 2: Verify that the Ethernet ...

    • Ingenico Lane/3000 Setting a Static IP Address for Your Device

      Article Contents: Setting a static IP address for your device is optional. Typically, the device is assigned an IP address automatically when connecting to a network. To manually set the network settings for the device, follow the steps below. Access ...