Ingenico Lane/3000 Time Setting

Ingenico Lane/3000 Time Setting


Article Contents:
To adjust the date and time in the Lane/3000 settings you will need to navigate the admin menu for the device by following the below instructions.

Step By Step Guide:

Step 1: Accessing and Navigating the Admin Menu. - The Admin Menu provides you access to the Settings, Configuration, Change Menu Password, and Restart Terminal options.

Step 2: Accessing the Menu . - To access the Admin Menu, do the following:

Press F and enter the default password of CCMerchant using the multi-tap method.
Press O (green button) to confirm the password and access the Admin Menu.

Step 3: Navigating the Menu 
Press the down arrow to scroll down.
Press the up arrow to scroll up.
Press O (green button) to select.
Press < (yellow button) to clear.
Press X (red button) to cancel or return to the main menu.

Step 4: Adjusting the Date/Time Settings:
Scroll down to Date and Time.
Press O (green button) to access Date and Time settings.
Enter the current date using the device number pad.
Scroll down to the time.
Enter the current time in 24-hour format, using the device number pad.
Press O (green button) to save your settings.

    • Related Articles

    • Ingenico Lane/3000 User Guide

      Article Contents: This Ingenico Lane/3000 User Guide covers the device's features, setup process, and troubleshooting. It explains how to connect the device, enter text using the multi-tap method, and access the Admin Menu for advanced configuration. ...

    • Ingenico Lane/3000 - Device Restarting Unexpectedly

      Article Contents: This article explains how to correct the issue of a device unexpectedly restarting during the day, which is commonly caused by inaccurate time settings. It provides a step-by-step guide to updating your time settings on the ...

    • Ingenico Lane/3000 - Configuring the Device Beep Settings

      Article Contents: Introduction to Beep Settings Adjustment, Accessing the Beep Menu for Temporary Changes, Adjusting Beep Settings: Steps and Parameters, Permanent Changes to Beep Settings, Contacting Support for Permanent Adjustments. Step By Step: ...

    • Ingenico Lane/3000 - Device Disconnected

      Step By Step: Step 1: Verify that you are using the provided multi-point mono connector (Ethernet) cable and power supply. The power supply plugs into the splitter on the Ingenico multi-point mono connector cable. Step 2: Verify that the Ethernet ...

    • Ingenico Lane/3000 Setting a Static IP Address for Your Device

      Article Contents: Setting a static IP address for your device is optional. Typically, the device is assigned an IP address automatically when connecting to a network. To manually set the network settings for the device, follow the steps below. Access ...