Ingenico Lane/3000 - Restarting The Device

Ingenico Lane/3000 - Restarting The Device

Step 1: You can restart your terminal using either of the following methods:

To perform a soft reboot, Access the Admin Menu and select the Restart Terminal option.

To perform a hard reboot, press and hold the .,#* key and < (yellow key) simultaneously until the device powers off. 


    • Related Articles

    • Ingenico Lane/3000 - Device Restarting Unexpectedly

      Article Contents: This article explains how to correct the issue of a device unexpectedly restarting during the day, which is commonly caused by inaccurate time settings. It provides a step-by-step guide to updating your time settings on the ...

    • Ingenico Lane/3000 User Guide

      Article Contents: This Ingenico Lane/3000 User Guide covers the device's features, setup process, and troubleshooting. It explains how to connect the device, enter text using the multi-tap method, and access the Admin Menu for advanced configuration. ...

    • Ingenico Lane/3000 - Device Disconnected

      Step By Step: Step 1: Verify that you are using the provided multi-point mono connector (Ethernet) cable and power supply. The power supply plugs into the splitter on the Ingenico multi-point mono connector cable. Step 2: Verify that the Ethernet ...

    • Ingenico Lane/3000 Time Setting

      Article Contents: To adjust the date and time in the Lane/3000 settings you will need to navigate the admin menu for the device by following the below instructions. Step By Step Guide: Step 1: Accessing and Navigating the Admin Menu. - The Admin Menu ...

    • Ingenico Lane/3000 Setting a Static IP Address for Your Device

      Article Contents: Setting a static IP address for your device is optional. Typically, the device is assigned an IP address automatically when connecting to a network. To manually set the network settings for the device, follow the steps below. Access ...