Ingenico Lane/3000 Setting a Static IP Address for Your Device

Ingenico Lane/3000 Setting a Static IP Address for Your Device

Article Contents:
Setting a static IP address for your device is optional. Typically, the device is assigned an IP address automatically when connecting to a network. To manually set the network settings for the device, follow the steps below.
Access the Admin Menu.

Step By Step Guide: 

Step 1: Press the down arrow to scroll down and press O (green button) to select Configuration.

Step 2: Press the down arrow to scroll down and press O (green button) to select IP Settings.

Step 3: Press the down arrow to scroll down and press O (green button) to select Configure IP.

Step 4: Press the down arrow to scroll down and press O (green button) to select Static IP.

Step 5: Enter the static IP Address using the number pad and press O (green button).

Step 6: Enter the Network Mask using the number pad and press O (green button).

Step 7: Enter the Gateway Address using the number pad and press O (green button).

Step 8: Enter the DNS Address 1 using the number pad and press O (green button).

Step 9: Enter the DNS Address 2 using the number pad and press O (green button). The terminal displays Updating IP configuration and restarting terminal, then restarts to connect using the new static configuration.

    • Related Articles

    • Ingenico Lane/3000 User Guide

      Article Contents: This Ingenico Lane/3000 User Guide covers the device's features, setup process, and troubleshooting. It explains how to connect the device, enter text using the multi-tap method, and access the Admin Menu for advanced configuration. ...

    • Ingenico Lane/3000 - Device Restarting Unexpectedly

      Article Contents: This article explains how to correct the issue of a device unexpectedly restarting during the day, which is commonly caused by inaccurate time settings. It provides a step-by-step guide to updating your time settings on the ...

    • Ingenico Lane/3000 Time Setting

      Article Contents: To adjust the date and time in the Lane/3000 settings you will need to navigate the admin menu for the device by following the below instructions. Step By Step Guide: Step 1: Accessing and Navigating the Admin Menu. - The Admin Menu ...

    • Ingenico Lane/3000 - Device Disconnected

      Step By Step: Step 1: Verify that you are using the provided multi-point mono connector (Ethernet) cable and power supply. The power supply plugs into the splitter on the Ingenico multi-point mono connector cable. Step 2: Verify that the Ethernet ...

    • POSLink - S300 - Setting Up A Static IP Address

      Article Contents: Setting up a static IP Address; S300 POSLink. Step 1: Setting a Static IP Address: Press the 1 and the F buttons simultaneously Password is "717777" -> Green Button On the main menu, press the down arrow once and select ...