Surface Go Recommend Settings

Surface Go Recommend Settings

Surface Go Recommend Settings:

1.     Download and install Club Caddie.

1.     Right Click - Pin to Start

2.     Right Click - Pin to Taskbar

2. Right Click on Desktop - Set Resolution to 1920 X 1280

1.     Set Zoom to 125% (150% may cut off some features)

3.     Taskbar Behavior - Automatically Hide.

4.     On-Screen Keyboard: Minimize so it doesn’t take up half of screen.

Other Notes:

  1. If Windows 10, enable tablet mode. Not required in Windows 11.
  1. Surface will not print to network printers in LTE mode. You must be connected to the same wireless network as the printer.


    • Related Articles

    • Adjusting Paper Settings For TSP100: Windows 8 and later

      1.    Before you power on your Star TSP100 receipt printer, go to the Star Micronics site, o   for Product Type, select Thermal o   for Printer Family, select TSP100 o   for Printer Model, select STAR TSP100ECO o   for Operating System, select Your ...
    • How to change the IP settings on a PAX S300 card reader.

      Article Contents This article shows how to change the IP settings on a PAX S300 card reader. Step-by-Step:   ​ Step 1: First press the 1 and the F buttons simultaneously on the credit card machine. This will then display a password prompt screen. The ...
    • Configuring A Cash Drawer

      Article Contents: Your cash drawer can be configured to automatically open when you print a receipt. The below guide will walk you through configuring the cash drawer. Here's how you can set up your Printer to open your Cash Drawer:: 1. Plug in the ...
    • Long Receipts Cutting Off in Windows

      Long Receipts Cutting Off in Windows For Windows users, printer settings can be configured to print a specific length of paper and then automatically stop printing or cut the receipt. For users, this means that receipts could be cut off early and not ...
    • Epson Long Receipts Cutting Off in Windows

      Long Receipts Cutting Off in Windows For Windows users, printer settings can be configured to print a specific length of paper and then automatically stop printing or cut the receipt. For users, this means that receipts could be cut off early and not ...